Facts About Smoke Detectors
Smoke detectors were first available for the home in the early 1960’s. Like all new technologies, these units were very expensive. They were only purchased by commercial property owners and movie theaters. The first truly affordable, battery-operated detectors were available in 1965. In 1980 Emerson Electronics purchased the rights to the smoke detectors from Statitrol, and Sears bought the exclusive distribution rights.
Today smoke detectors are installed in about 93% of all U.S. Homes. However, it is estimated that at any give time as many as 30% of the smoke detectors are not functional as users remove the batteries when they die and forgot to replace them. As home inspectors, we often find smoke detectors that don’t work, or are missing altogether.
There are basically two kinds of detectors available for residential installation. Optical smoke detectors operate by detecting the smoke particles in the air. Ionization smoke detectors operate by using radioactive isotopes to ionize the air. Smoke changes the ionization, which is detected by these detectors.
It has been conclusively demonstrated that Optical smoke detectors are better at detecting smoke in the early stages of a fire allowing the occupants more time to escape. Ionization type detectors are cheaper to manufacture but are more prone to false alarms. Due to the radiation, these detectors have been banned in some European countries.
We recommend the Optical smoke detectors as they provide better detection of fires in the early stages, leaving occupants more time to escape. Ionization detectors are better at detecting fires that are in the flaming stage, but that might not allow enough time to escape. The National Fire Protection Agency (NFPA) has determined that all smoke detectors should be replaced every 10 years.
And smoke alarms should be placed in the following locations:
- One on each level
- Outside of every group of sleeping rooms (hallway)
- Inside sleeping rooms
- Newer homes require smoke detectors to be interconnected
Placing smoke detectors outside of a bedroom provides for earlier detection of fires if the bedroom door is closed. However, the sound may be reduced due to the closed door, and not wake the occupant. That’s why newer installations require the alarms to be interconnected so that regardless of where the fire starts occupants will be awakened.
Back to the Midnight Chirps
Now back to my 2 AM wake-up call. That annoying “Chirp” … “Chirp” that you hope will stop but doesn’t. Why does it always happen in the middle of the night?
Most smoke detectors operate on batteries or have a backup battery. When these batteries fall below a certain voltage, the detector warns us by chirping. Electricity is produced by a chemical reaction inside the battery. As with most chemical reactions, lower temperatures cause the chemical reactions to occur more slowly. This results in reduced electrical output, so the detector is simply telling you that the battery is nearly dead.
As we all know temperatures drop during the night. When you have a battery that is near the end of its life, it may produce just enough power during the warmth of the day to satisfy the detector. However, when the evening temperatures drop enough to slow the chemical reaction of the battery, and thus the electrical output, the detector warns that the battery is too weak to function. And that is why they almost always wake us up in the middle of the night when temperatures are at their lowest of the day.
Chirp. Chirp.
Please upgrade your smoke detectors to new detectors that have a sealed, 10-year battery so you don’t have to change them for years.
If you are in need of a commercial or residential inspection, including pools, mold, sewer, defensible space and more, please give us a call. We are here to ensure that our buyers understand what they are paying for when buying a home with us.